It is currently Tue Aug 25, 2026 3:56 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 13 posts ] 
Author Message
 Post subject: The Return of Steamlocomotive.info
PostPosted: Fri Dec 26, 2025 4:05 pm 
User avatar

Joined: Sun Oct 10, 2004 11:30 am
Posts: 1263
Location: Eagan, MN
Well, the bulk of the technical issues attendant upon moving the site to our new hosting company have been resolved. Work has begun on restoring the site. I'm hoping to have it completely back before surgery (January 8th). A lot of work still to be done, but its just drudgery. I'll probably announce any success or issues here.

Secondarily, I do NOT have any concrete plans for the site's survival after my demise. I will give that some thought after I'm done with my upcoming surgery (which should not be catastrophic) which is essentially doing laser ablation on the tumor via my pre-existing plumbing. We've done this once before (shudder).

The oncologists are still saying I've got "a couple of years" before this kills me, so at least I've got some time to work on a solution.

I am, perhaps, being a bit more blunt than I should but, whatever.

Regards,
Doug


Offline
 Profile  
 
 Post subject: Re: The Return of Steamlocomotive.info
PostPosted: Fri Dec 26, 2025 5:46 pm 

Joined: Thu Feb 26, 2009 3:07 pm
Posts: 1209
Location: B'more Maryland
That's fantastic to hear.

Once it's up and running I have a tool that can take a snapshot. I can run that if you'd like. This way at least a static version will be around.

I've done that on a number of sites and it works pretty well. That's how I preserved http://wmwestsub.rrarchives.org/

_________________
If you fear the future you won't have one.
The past was the worst.


Offline
 Profile  
 
 Post subject: Re: The Return of Steamlocomotive.info
PostPosted: Fri Dec 26, 2025 5:50 pm 

Joined: Fri Aug 27, 2004 4:02 pm
Posts: 1881
Location: Back in NE Ohio
How possible would it be for someone (definitely not technologically challenged me) to take both Steamlocomotive.info and this site and combine them into a workable successor site? That might be a solution if a couple of competent enthusiasts were willing to work on it. Just throwing it out there.


Offline
 Profile  
 
 Post subject: Re: The Return of Steamlocomotive.info
PostPosted: Fri Dec 26, 2025 6:11 pm 

Joined: Sun Aug 22, 2004 7:25 pm
Posts: 2559
Location: The Atlantic Coast Line
Doug,

Thank you!

Looking ahead, I have a pdf copy of a local news article when the small steam engine was moved to display in Florence, SC. Is a pdf something you can post to the notes for the engine?

Blessings for your upcoming surgery,

Wesley


Offline
 Profile  
 
 Post subject: Re: The Return of Steamlocomotive.info
PostPosted: Sat Dec 27, 2025 12:27 am 

Joined: Sun Aug 22, 2004 11:54 pm
Posts: 2606
steaminfo wrote:
Well, the bulk of the technical issues attendant upon moving the site to our new hosting company have been resolved. Work has begun on restoring the site. I'm hoping to have it completely back before surgery (January 8th). A lot of work still to be done, but its just drudgery. I'll probably announce any success or issues here.

Secondarily, I do NOT have any concrete plans for the site's survival after my demise. I will give that some thought after I'm done with my upcoming surgery (which should not be catastrophic) which is essentially doing laser ablation on the tumor via my pre-existing plumbing. We've done this once before (shudder).

The oncologists are still saying I've got "a couple of years" before this kills me, so at least I've got some time to work on a solution.

I am, perhaps, being a bit more blunt than I should but, whatever.

Regards,
Doug


Hold out some hope. There are things that have been released in the past few years and on the horizon that are doing wonders, such as Keytruda and other immunologicals that are being developed. Also get things like Vitamin D tested and discuss results with doctor. Vitamin D is essential for apotosis (programnmed cell death), something you clearly want with C.

Godspeed.


Offline
 Profile  
 
 Post subject: Re: The Return of Steamlocomotive.info
PostPosted: Tue Dec 30, 2025 1:04 pm 

Joined: Fri Dec 03, 2004 9:42 pm
Posts: 3011
PaulWWoodring wrote:
How possible would it be for someone (definitely not technologically challenged me) to take both Steamlocomotive.info and this site and combine them into a workable successor site? That might be a solution if a couple of competent enthusiasts were willing to work on it. Just throwing it out there.


For this site, it's quite simple really. I (and many others) could have a working forum up and running within a week.

What's not as simple.
1) Getting everyone that's here to migrate to the new site.
2) Starting over, from scratch and losing years of info that has been assembled here.

It would be possible to migrate that as well (or most of it, there's always a few glitches) but that would require the help and approval of the current site owner. Otherwise, even though it's essentially abandoned, it would potentially violate copyrights.


Offline
 Profile  
 
 Post subject: Re: The Return of Steamlocomotive.info
PostPosted: Tue Dec 30, 2025 6:45 pm 

Joined: Thu Oct 08, 2015 11:54 am
Posts: 2055
Location: New Franklin, OH
Bob - If (big IF) you can get access.... IIRC, this is phpBB ver. 3.1 and you'd need to upgrade to 3.2 to use the import tool in Xenforo. Going from 3.1 to 3.2 should be painless (operative word there being "should"). I've never done that myself and my PHP skills are gawd-awful rusty nowadays - seems I've forgotten more than I knew. I'd still be willing to help, though.

_________________
Eric Schlentner
Turner of Wrenches, Drawer of Things


Offline
 Profile  
 
 Post subject: Re: The Return of Steamlocomotive.info
PostPosted: Tue Dec 30, 2025 7:22 pm 

Joined: Fri Dec 03, 2004 9:42 pm
Posts: 3011
jayrod wrote:
Bob - If (big IF) you can get access.... IIRC, this is phpBB ver. 3.1 and you'd need to upgrade to 3.2 to use the import tool in Xenforo. Going from 3.1 to 3.2 should be painless (operative word there being "should"). I've never done that myself and my PHP skills are gawd-awful rusty nowadays - seems I've forgotten more than I knew. I'd still be willing to help, though.


Yes, I'm sure there would be challenges. There would also likely be some data loss. Any time you do an import like that, there's always glitches. There's also problems in the data to start with 10 year old posts that reference a post or any image that's long gone.

It wouldn't be perfect and it may be tricky but even if we can save 90% of it, that's a great foundation. I've been offering for years though and never had a response, so it appears it's a lost cause.


Offline
 Profile  
 
 Post subject: Re: The Return of Steamlocomotive.info
PostPosted: Tue Dec 30, 2025 8:19 pm 

Joined: Sun Aug 22, 2004 7:25 pm
Posts: 2559
Location: The Atlantic Coast Line
Bobharbison wrote:
jayrod wrote:
Bob - If (big IF) you can get access.... IIRC, this is phpBB ver. 3.1 and you'd need to upgrade to 3.2 to use the import tool in Xenforo. Going from 3.1 to 3.2 should be painless (operative word there being "should"). I've never done that myself and my PHP skills are gawd-awful rusty nowadays - seems I've forgotten more than I knew. I'd still be willing to help, though.


Yes, I'm sure there would be challenges. There would also likely be some data loss. Any time you do an import like that, there's always glitches. There's also problems in the data to start with 10 year old posts that reference a post or any image that's long gone.

It wouldn't be perfect and it may be tricky but even if we can save 90% of it, that's a great foundation. I've been offering for years though and never had a response, so it appears it's a lost cause.


BUT…
Dave Collison needs to agree!


Offline
 Profile  
 
 Post subject: Re: The Return of Steamlocomotive.info
PostPosted: Mon Jan 05, 2026 5:16 pm 
User avatar

Joined: Sun Oct 10, 2004 11:30 am
Posts: 1263
Location: Eagan, MN
Happy to report that I now have all the necessary access to continue porting steamlocomotive.info to its new home. This is a relief, but I can't promise dramatic progress. I'm having surgery on Thursday so my efforts this week are going to be fairly limited. I'll try to attack the port next weekend. Thank you for your patience.

And to the person who threatened to sue me for denying him access to "essential data" please have the goodness to eat feces and bark at the moon.

Regards, Doug


Offline
 Profile  
 
 Post subject: Re: The Return of Steamlocomotive.info
PostPosted: Tue Jan 06, 2026 11:52 am 

Joined: Thu Oct 08, 2015 11:54 am
Posts: 2055
Location: New Franklin, OH
Quote:
And to the person who threatened to sue me for denying him access to "essential data" please have the goodness to eat feces and bark at the moon.

Geez. I guess someone knows neither the concepts of "essential data" nor personal property. Counter sue because you can't access his personal data. (Just kidding).

_________________
Eric Schlentner
Turner of Wrenches, Drawer of Things


Offline
 Profile  
 
 Post subject: Re: The Return of Steamlocomotive.info
PostPosted: Fri Jan 09, 2026 6:16 pm 
User avatar

Joined: Sun Oct 10, 2004 11:30 am
Posts: 1263
Location: Eagan, MN
Well, I didn't make it by the 8th. Sigh. But I do have some good news: chemotherapy was successful and for the moment, they say, my kidney and bladder are "disease free". Got to ring the post chemo bell and I did so with enthusiasm.

Now on to the website. Wheefun.

_________________
Doug Bailey, Webmaster http://www.steamlocomotive.info


Offline
 Profile  
 
 Post subject: Re: The Return of Steamlocomotive.info
PostPosted: Fri Jan 09, 2026 6:45 pm 

Joined: Sun Aug 22, 2004 7:25 pm
Posts: 2559
Location: The Atlantic Coast Line
Doug,

Check PM

Wesley


Offline
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 13 posts ] 

All times are UTC - 5 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: