| Railway Preservation News https://rypn.org/forums/ |
|
| Wanted: Block heater for Alco S-3 https://rypn.org/forums/viewtopic.php?f=2&t=35317 |
Page 1 of 1 |
| Author: | Matt Bumgarner [ Fri Jul 19, 2013 2:09 pm ] |
| Post subject: | Wanted: Block heater for Alco S-3 |
We are seeking a 220V block heater for an Alco S-3. Please contact if you have one available. Matt Bumgarner Alexander Chapter-NRHS SE Narrow Gauge & Shortline Museum |
|
| Author: | Mike Tillger [ Fri Jul 19, 2013 9:31 pm ] |
| Post subject: | Re: Wanted: Block heater for Alco S-3 |
Matt, if your handy with plumbing and electrical, make your own, use a small circulating pump(household boiler type), and commercial grade water heater elements screwed into the ends of T fittings in a zig zag fashion, 3 4500 watt elements will keep your block warm. Install appropriate thermostat and contactors, all off the shelf items at a good plumbing supply house. Don't forget to install automatic drains in case of a power failure, I prefer the GURU brand. Mike Tillger |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|