It is currently Thu Mar 28, 2024 5:34 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 37 posts ]  Go to page 1, 2, 3  Next
Author Message
 Post subject: First Fire Up - WMSR #1309
PostPosted: Tue Oct 02, 2018 1:25 pm 

Joined: Sun Jan 11, 2009 5:31 pm
Posts: 329
Another Milestone reached....

This morning ( Tuesday, October 02, 2018 ) at 11:19 am. Gary Bensman lit the first fire in Western Maryland Scenic Railroad's ex. C&O #1309's firebox. The locomotive still on a shop truck and it's trailing truck was outside the rear of the shop this morning for the fire-up.

Photos later after I download the camera.

Tim Wilson


Offline
 Profile  
 
 Post subject: Re: First Fire Up - WMSR #1309
PostPosted: Tue Oct 02, 2018 2:21 pm 

Joined: Mon Mar 20, 2017 5:26 pm
Posts: 612
Location: Pure Michigan
Is there currently a completion date for the engine?


Offline
 Profile  
 
 Post subject: Re: First Fire Up - WMSR #1309
PostPosted: Tue Oct 02, 2018 2:52 pm 

Joined: Sun Jan 11, 2009 5:31 pm
Posts: 329
NS 3322 wrote:
Is there currently a completion date for the engine?



... when it's done ...... !

Tim W.


Offline
 Profile  
 
 Post subject: Re: First Fire Up - WMSR #1309
PostPosted: Wed Oct 03, 2018 5:58 am 

Joined: Fri Mar 26, 2010 11:28 am
Posts: 135
A completion date for the locomotive has not been determined. Additional information concerning #1309 will come from Diversified Rail and WMSR as the overhaul/restoration progresses. The project has enjoyed excellent support and for that...we all say "thank you".


Offline
 Profile  
 
 Post subject: Re: First Fire Up - WMSR #1309
PostPosted: Wed Oct 03, 2018 3:43 pm 

Joined: Sun Jan 11, 2009 5:31 pm
Posts: 329
Photos taken at Ridgeley, WV - 02 October 2018


Attachments:
Smoke01reduced.JPG
Smoke01reduced.JPG [ 232.77 KiB | Viewed 10044 times ]
smoke02reduced.JPG
smoke02reduced.JPG [ 262.17 KiB | Viewed 10044 times ]
Offline
 Profile  
 
 Post subject: Re: First Fire Up - WMSR #1309
PostPosted: Wed Oct 03, 2018 4:25 pm 

Joined: Sat Aug 21, 2004 10:50 pm
Posts: 567
Does anyone know if the drivers and boxes are essentially ready to go back under the 1309 yet?

Rob Gardner


Offline
 Profile  
 
 Post subject: Re: First Fire Up - WMSR #1309
PostPosted: Wed Oct 03, 2018 5:32 pm 

Joined: Sun Jan 08, 2017 12:39 am
Posts: 90
Happy to see a milestone reached in this restoration. The 1472 clock starts now.

Was there any support underneath the middle of the boiler? Hard to tell from photos.


Offline
 Profile  
 
 Post subject: Re: First Fire Up - WMSR #1309
PostPosted: Wed Oct 03, 2018 7:25 pm 

Joined: Sun Jan 11, 2009 5:31 pm
Posts: 329
Couple more from Tuesday, Oct 02, 2018


Attachments:
steam04small.JPG
steam04small.JPG [ 330.73 KiB | Viewed 9702 times ]
steam03small.JPG
steam03small.JPG [ 318.64 KiB | Viewed 9702 times ]
Offline
 Profile  
 
 Post subject: Re: First Fire Up - WMSR #1309
PostPosted: Wed Oct 03, 2018 10:54 pm 

Joined: Fri Mar 05, 2010 3:41 am
Posts: 3911
Location: Inwood, W.Va.
Story at Trains, with an additional photo. . .safeties are up, and steam from the whistle, too!

http://trn.trains.com/news/news-wire/20 ... -2-no-1309

Image


Offline
 Profile  
 
 Post subject: Re: First Fire Up - WMSR #1309
PostPosted: Thu Oct 04, 2018 9:38 am 

Joined: Sun Aug 07, 2005 1:24 am
Posts: 90
Location: Michigan
Congratulations to WMSR and everyone involved on the first successful steam test!

RookieFireman wrote:
Happy to see a milestone reached in this restoration. The 1472 clock starts now.

Was there any support underneath the middle of the boiler? Hard to tell from photos.

Isn't it the case that the clock starts ticking when the first tube is rolled in, not the first fireup?

Looking at "Smoke01reduced.JPG" and "smoke02reduced.JPG", if you zoom in, it's pretty clear there's no intermediate support. However, speaking as a mechanical engineer, while not ideal, since it's stationary and not seeing regular service like this, it should be just fine.

YeOldeEnjine wrote:
NS 3322 wrote:
Is there currently a completion date for the engine?



... when it's done ...... !


Amen! Too many times people like to ask "when is going to be done" and the problem that plagues us in trying to answer is there are so many little issues that crop up along the way that it significantly alters the completion date. From a project management perspective, most people don't pad the schedule with enough "fluff" time and $$ to get close to the actual date and cost. Unforeseen, unanticipated problems arise later that couldn't have been planned for because these are not high precision brand new devices.

Rob Gardner wrote:
Does anyone know if the drivers and boxes are essentially ready to go back under the 1309 yet?

Don't think so at this very moment, but I'm sure they've got a plan for them. These pics were from almost 2 weeks ago:
Attachment:
20180921_143537.jpg
20180921_143537.jpg [ 266.12 KiB | Viewed 9125 times ]

Attachment:
20180921_144130.jpg
20180921_144130.jpg [ 344.59 KiB | Viewed 9125 times ]


1309 will be coming into service lettered for "Western Maryland", not "Chesepeake & Ohio". Eventually, 1309 will be lettered/numbered as Western Maryland #960.


Offline
 Profile  
 
 Post subject: Re: First Fire Up - WMSR #1309
PostPosted: Thu Oct 04, 2018 11:18 am 

Joined: Fri Dec 03, 2004 9:42 pm
Posts: 2875
aswright wrote:
Amen! Too many times people like to ask "when is going to be done" and the problem that plagues us in trying to answer is there are so many little issues that crop up along the way that it significantly alters the completion date.


Yes, and this engine demonstrated just how wrong estimated completion dates can be, complete with a highly publicized debut trip that was cancelled.

However... Presumably the operation has some kind of current project timeline, for budgeting and planning purposes. Saying something general would be nice, and you can add qualifiers.

Something like "Based on recent progress, the project hopes to be completed in the Spring of 2020 (random date, no basis in fact), barring any additional major problems."

I don't think folks are looking for July 7, 2020 at 4 PM, but rather "Six months or six years?"


Offline
 Profile  
 
 Post subject: Re: First Fire Up - WMSR #1309
PostPosted: Thu Oct 04, 2018 11:30 am 

Joined: Tue Sep 14, 2004 7:52 am
Posts: 2561
Location: Strasburg, PA
Bobharbison wrote:
"Six months or six years?"

That's as accurate an estimate as you are going to find.


Offline
 Profile  
 
 Post subject: Re: First Fire Up - WMSR #1309
PostPosted: Thu Oct 04, 2018 12:14 pm 

Joined: Sun Aug 22, 2004 3:37 pm
Posts: 1275
Location: Pacific, MO
With a project like this, the worst thing you can do is put a completion date on it and then bust your butt trying to meet it. Things that need attention will get the old "that's good enough" treatment or "we'll do it next year". Great way to have a ongoing overhaul in progress. The thing you pass by may well be what stops you in your tracks.
It is down to the bare bones. Do it right.
I keep thinking of the old saying "Not enough time to do it right, but time to do it twice".


Offline
 Profile  
 
 Post subject: Re: First Fire Up - WMSR #1309
PostPosted: Thu Oct 04, 2018 12:19 pm 

Joined: Sun Aug 07, 2005 1:24 am
Posts: 90
Location: Michigan
Kelly Anderson wrote:
Bobharbison wrote:
"Six months or six years?"

That's as accurate an estimate as you are going to find.


Absolutely. No one currently knows what is hiding in the project still yet to be found that can disrupt the current plan. Even large companies suffer from the same issues plaguing projects in all other sorts of industries. I work for a company that makes paint shops for large industrial manufacturers. On a recent project I was working on, all sorts of things popped up that no one anticipated and it pushed the schedule back quite significantly and substantially inflated the budgeted costs. There were a lot of reasons for these issues, but in our case, we have a lot of new/green talent leading projects that doesn't know how to plan for some things and we are relearning some of that as many of the older heads retire. It's a good thing not everyone retires at once!


Offline
 Profile  
 
 Post subject: Re: First Fire Up - WMSR #1309
PostPosted: Thu Oct 04, 2018 12:59 pm 

Joined: Fri Apr 26, 2013 5:56 pm
Posts: 399
Location: Ontario, Canada.
Congratulations on this latest success.
Forgive my ignorance, and please, I mean nothing negative by the following questions. I am just curious. What is the reason for firing up at this point in the restoration? Or is it simply a case of showing the flag and keeping everyone engaged?
Thank you, and best wishes to all involved with this project.


Offline
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 37 posts ]  Go to page 1, 2, 3  Next

All times are UTC - 5 hours [ DST ]


 Who is online

Users browsing this forum: 70000, cbq9911a, Google [Bot], Majestic-12 [Bot] and 117 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: