All, I am looking for a minimum of four but preferably 8 roller bearing wheelsets for ALCO switchers fitted with GE 752 traction motors. I am looking for good RTO wheelsets with roller bearing journal boxes. Must be compatible for GE 752 motors, so the axle diameter must be 8 7/8 inches as I understand. Wheels should be not less than 2 inches remaning tread wear.





I am also after two sets of 26L rebuildable cores for conversion of 6SL/6L to 26FNL/26NL brake setups for those same switchers.



Also casually looking for one Nathan M3RT-1 air horn.



Thanks!