| Railway Preservation News http://rypn.org/forums/ |
|
| Looking for Tapered Cast Washers http://rypn.org/forums/viewtopic.php?f=2&t=22148 |
Page 1 of 1 |
| Author: | oermsam [ Tue Sep 26, 2006 2:27 pm ] |
| Post subject: | Looking for Tapered Cast Washers |
Looking for a supplier or borrow a pattern for the old style thrust washers. For example a 1/2" id washer would be 1" on "top" surface and taper to 2+" on the bottom, and would be about 1/2" thick. The were used everywhere. However, can not find a supplier for anything like these. Thanks |
|
| Author: | John Redden [ Fri Mar 02, 2007 8:21 pm ] |
| Post subject: | Re: Looking for Tapered Cast Washers |
A friend passed along this information, on your request. McMaster-Carr carries the type of washer that you describe. Their online catalog is at http://www.mcmaster.com/ Search for "Western Washers". I tried to paste some images in this post, but could not get it to work properly. Regards, John Redden R&GV RR Museum |
|
| Author: | oermsam [ Tue Mar 13, 2007 3:07 am ] |
| Post subject: | Re: Looking for Tapered Cast Washers |
I actually found the thing when I got the right name. They are OGEE washers and I found a place that still casts them and has them in stock up to 1.5 inch ID. The company is Lawler Manufacturing in Alabama, and they’re on the Web. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|