Railway Preservation News http://rypn.org/forums/ |
|
GG1 disassembly photos http://rypn.org/forums/viewtopic.php?f=1&t=44634 |
Page 1 of 1 |
Author: | bbunge [ Fri Jul 10, 2020 12:40 pm ] |
Post subject: | GG1 disassembly photos |
Just for the record. This set of photos showing the replacement of the articulation pin in a GG1 came across a Facebook feed. Perhaps these may one day provide clues to a future group looking to move a GG1 in pieces, be it on flat cars by truck (ie in three pieces, two sets of running gear and the body). https://tinyurl.com/yag9wmof Original URL here: https://digital.hagley.org/islandora/se ... 28GG1%29?f[0]=-RELS_EXT_isMemberOfCollection_uri_ms%3A(%22info%3Afedora%2Fislandora%3Aead%22)&f[1]=mods_originInfo_dateCreated_mdt%3A[1960-01-01T12%3A00%3A00Z%20TO%202020-01-01T12%3A00%3A00Z]&cp=islandora%3A2339204&islandora_solr_search_navigation=1&fbclid=IwAR1id8mfAeEXCki0_MMLXpNU1cfiWOYQUvs5uEp3aCf43uXFs1mebeHd0wE Bob |
Author: | NYCRRson [ Sat Jul 11, 2020 11:50 pm ] |
Post subject: | Re: GG1 disassembly photos |
Very interesting collection of photos at that site. Here is one of a VERY LARGE metal planer; https://digital.hagley.org/PRR_09958?so ... fset%5D=16 A metal planer is a large metal working machine where the work-piece (ie a gg1 frame) was mounted to a table that moved linearly "back and forth" past a metal cutting tool. Very interesting (and large machines). To finish a flat surface on a large 50 foot casting it would require a 100 foot planer.. Imagine running a wood plane over a 50 foot beam and getting it flat enough for the intended purpose. It looks like the GG1 frame is setup in the metal planer to finish machine the inside/outside surfaces of the axle bearing boxes ? Great photos, very interesting details. Cheers, Kevin |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |