It is currently Thu Nov 15, 2018 5:10 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 12 posts ] 
Author Message
 Post subject: Caboose trucks campaign
PostPosted: Thu Nov 08, 2018 10:43 pm 

Joined: Sat Jan 31, 2009 4:12 am
Posts: 738
Location: cheyenne
We are doing well but need to try to meet our target, the first set of trucks is coming from Washington and trucking loading and unloading is going to be $3750. So please help, the trucks are being generously donated, and the Demolition of the caboose is done, with help from Facebook followers in the Renton area Drew Black in particular, we thank them so much.
The three or four trucks in Montana will be next but we don't know a price yet.
https://www.gofundme.com/6baoztc


Thanks a again to everyone
Mike Pannell
High Plains Railroad Preservation


Attachments:
20181108_194621.jpg
20181108_194621.jpg [ 294.09 KiB | Viewed 1594 times ]
Offline
 Profile  
 
 Post subject: Re: Caboose trucks campaign
PostPosted: Fri Nov 09, 2018 1:18 am 

Joined: Sun Jan 30, 2005 2:27 am
Posts: 497
Location: Winters, TX
Is there another way to donate other than GoFundMe?


Offline
 Profile  
 
 Post subject: Re: Caboose trucks campaign
PostPosted: Fri Nov 09, 2018 3:20 pm 

Joined: Sat Jan 31, 2009 4:12 am
Posts: 738
Location: cheyenne
Charlie wrote:
Is there another way to donate other than GoFundMe?



Hello yes,
Checks etc can be sent to High Plains Railroad Preservation, 1120 cactus hill rd, Cheyenne,WY 82001

Thanks

Mike Pannell


Offline
 Profile  
 
 Post subject: Re: Caboose trucks campaign
PostPosted: Fri Nov 09, 2018 6:35 pm 

Joined: Sun Jan 30, 2005 2:27 am
Posts: 497
Location: Winters, TX
Thanks!


Offline
 Profile  
 
 Post subject: Re: Caboose trucks campaign
PostPosted: Sat Nov 10, 2018 3:20 am 

Joined: Sun May 12, 2013 2:46 pm
Posts: 188
I recently moved a pair of heavy Andrews trucks from Denver to Chicago using a truck broker that was 50% less than the other brokers I had called and they arranged for quick and convenient delivery with very short notice from me. I highly recommend them. If interested please PM me .Good luck on your project.
Mark.


Offline
 Profile  
 
 Post subject: Re: Caboose trucks campaign
PostPosted: Mon Nov 12, 2018 4:39 pm 

Joined: Sun Aug 22, 2004 7:23 am
Posts: 445
Location: Strasburg, PA
Those trucks are glorious.

_________________
Steve


Offline
 Profile  
 
 Post subject: Re: Caboose trucks campaign
PostPosted: Mon Nov 12, 2018 7:30 pm 

Joined: Sat Oct 17, 2015 5:55 pm
Posts: 635
I didn't catch where the above frame and trucks came from, was this a UP caboose somewhere? The body was too far gone to be saved apparently.


Offline
 Profile  
 
 Post subject: Re: Caboose trucks campaign
PostPosted: Tue Nov 13, 2018 11:22 am 

Joined: Sat Jan 31, 2009 4:12 am
Posts: 738
Location: cheyenne
PMC wrote:
I didn't catch where the above frame and trucks came from, was this a UP caboose somewhere? The body was too far gone to be saved apparently.


The caboose was in Renton WA, we aren't sure which CA1 it was but have saved the wood above the door which will tell us, its an OSL caboose we think anyway. Body was rotten as a pear under the cupola.

Mike Pannell


Offline
 Profile  
 
 Post subject: Re: Caboose trucks campaign
PostPosted: Tue Nov 13, 2018 7:09 pm 

Joined: Sat Oct 17, 2015 5:55 pm
Posts: 635
car57 wrote:

The caboose was in Renton WA, we aren't sure which CA1 it was but have saved the wood above the door which will tell us, its an OSL caboose we think anyway. Body was rotten as a pear under the cupola.

Mike Pannell

I noticed that you marked "save" on brake parts, the end railing and ladders, couplers etc, and it looks like the frame too, excuse my lack of knowledge but would you be able to essentially drop one of your caboose bodies down on this frame?


Offline
 Profile  
 
 Post subject: Re: Caboose trucks campaign
PostPosted: Tue Nov 13, 2018 8:03 pm 

Joined: Wed Aug 25, 2004 11:06 pm
Posts: 212
Location: Bendena KS
Not to speak for Mike, but, at least in theory, it would be possible to put another body right back on the frame. This would be especially true if the body and frame were of the same class and built by the same builder at the same time. Certainly one of Mike’s UP caboose bodies will be a perfect match for this frame.

Jason Midyette


Offline
 Profile  
 
 Post subject: Re: Caboose trucks campaign
PostPosted: Wed Nov 14, 2018 10:47 am 

Joined: Sat Jan 31, 2009 4:12 am
Posts: 738
Location: cheyenne
Sadly the frame will be cut , the costs of loading it and moving it preclude saving it, its approximately $7000 to $8000 to move it here without cranes each end as its a wide load. Also in order to put another body on the frame all the siding would have to be removed, it would be a nightmare job as they were never designed to come apart again. The CA1's are far more flimsy than the CA's despite having steel built into them.

Mike Pannell


Offline
 Profile  
 
 Post subject: Re: Caboose trucks campaign
PostPosted: Wed Nov 14, 2018 2:13 pm 

Joined: Fri May 09, 2008 8:06 am
Posts: 14
Location: Walla Walla, Washington
Crazy Idea-Rotate the frame 90 degrees so it rests on one side-if it holds together. LARGE forklift could do the trick. Completely brace it. Now it would n0 longer be a wide-load and may not be a high-load either. Mind expanding drugs can be helpful.


Offline
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 

All times are UTC - 5 hours [ DST ]


 Who is online

Users browsing this forum: Google [Bot], Majestic-12 [Bot], Rainier Rails and 31 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: